Anti Glare Film

From: $74.00

Anti Glare Film is placed on the outside or opposite side of the glass or acrylic than your rear projection film. Anti Glare Film reduces glare and reflection from the front side surface of your display, increasing brightness, widening viewing angles, and giving your viewing audience a brighter and more even viewing experience.


Download Anti-Glare Film Spec Sheet:

Anti-Glare Film Spec Sheet

*Except in the case of manufacturer defect, all film sales are non-returnable.

Clear
SKU: AG Category:

Description

Reduce Glare, Enhance Brightness, Widen Viewing Angles

Anti Glare Film is placed on the outside or opposite side of the glass or acrylic than your rear projection film. It reduces glare and reflection from the front side surface of your display, increasing brightness, widening viewing angles, and giving your viewing audience a brighter and more even viewing experience.

AG Film can be used with our White, Dark, and Black rear projection films, or any LCD, Plasma, and LED screens. When using LCD, LED, or Plasma displays, the displays need to be as close as possible to the backside of the Anti Glare Film for best results.

This product can also be used on phones, glass over pictures and paintings, windows with static graphics behind them, and many more applications where glare and reflection needs to be reduced. The rule of thumb with ant glare films is that the display, picture, or image need to be as close to the anti glare film as possible to achieve the best results, the farther from the Anti Glare Film the image or display is the less the film will work, and the image will start to appear fuzzy or distorted.

Anti Glare Film applies much like our rear projection films do. Pulling the release layer off the back of your Anti Glare Film exposes the built in hi tac adhesives that will keep your film affixed to your glass or acrylic surface for years to come.

Things to remember when applying Anti Glare Film to a surface

Anti Glare film should not be applied with regular water and use of a professional installer or our standard or Pro DIY application kit is recommended for best results. You can read our DIY application guide here or feel free to email or call with any questions you may have.

Handling Notice

As with all of our films, Anti Glare Film should be handled with care during the installation process. If a film is creased before installation, the crease my not come out of the film during the installation process. Make sure to visit our installation page for general installation guidelines.

Shipping Details

All products are shipped ground.

Need your product shipped fast? Email us at info@projectionfilm.us about RUSH shipping.

Size Chart

Our film is listed by its diagonal size according to a 16:9 aspect ratio. For specific measurements, please view the information below or contact a representative.

35″ = 17 x 31″ 42″ = 21 x 37″ 46″ = 23 x 40″ 50″ = 25 x 44″ 60″ = 29 x 52″
67″ = 33 x 58″ 84″ = 41 x 73″ 92″ = 45 x 80″ 100″ = 49 x 87″ 122” = 60 x 106″

You may also like…